Manufacturing Engineer for Composites Process

hace 4 semanas

Getafe, España Airbus A tiempo completo

An opportunity for a **Manufacturing Engineer for Composites Process **has arisen within Airbus Defence and Space, Getafe (Madrid).

**RESPONSIBILITIES**
- Drive implementation of 1st installation with required shop floor feedback loops.
- Create / update routings / BoM / SOI taken into account shop floor needs, Time calculation and Work Preparation Golden Rules in accordance with applicable processes.
- Specify industrial asset (Jigs, Tools, Tooling, Machines, ) requirements for creation or modification.
- Plan regular feedback loops with the Production Team.
- Manage key / recurrent work prep issues escalated by the Production Team / Tech shop floor support.
- Communicate directly and by a physical participation in Production Team routines.
- Support shop floor continuous improvement by providing work prep expertise when issues not managed at shop floor level by technical shop floor support.
- Support PPE in:

- evaluating industrial impacts of modifications;
- translating industrial requirements to design & supply chain.
- Accountable for Support configuration management.
- Run and support P-FMEA/FMEA.
- Depending on the division, provide technical expertise to the DPE.
- Role of ME within supply chain management guaranteeing full consistency and effectivity of data (eg: Missing part, stock, Material Requirement Planning impacts).

**SKILLS**
- A background in an aerospace engineering environment, preferably within the space sector
- Experience in Composites Manufacturing Technologies and/or processes: automatic (ATL/AFP) and/or manual (HLU)
- Procedures and process control.
- Able to work eventually offsite for specific periods of time at short notice.
- Work overtime and occasional shifts, as and when required.
- Soft Skills:

- Team working skills.
- Practical and proactive.
- Process and Quality driven approach with high attention to detail.
- High self-motivation and ability to deal with changing priorities on a multi project basis.
- Good self-planning skills and process competence.
- Good communication skills, both written and verbal.
- Nice to have:

- A good understanding of spacecraft manufacture and assembly philosophies
- Clean room or Space experience
- CATIA Design background and or equivalent 3D CADCAM supported tool.
- MS Project and or equivalent activity planning tool
- Airbus OES / AOS Manufacturing Excellence standards
- APQP ME tool set: PFMEA, Control Plan, SPC, MSA

**WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE?**

At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits:

- Vacation days plus additional days-off along the year.
- Attractive salary.
- Hybrid model of working when possible, promoting the work-life balance.
- Collective transport service in some sites.
- Benefits such as health insurance, employee stock options, retirement plan, or study grants.
- On-site facilities (among others): free canteen, kindergarten, medical office.
- Possibility to collaborate in different social and corporate social responsibility initiatives.
- Excellent upskilling opportunities and great development prospects in a multicultural environment.
- Special rates in products & benefits.

**WANT TO KNOW MORE ABOUT US? #AirbusDiversity**

Airbus is a leader in designing, manufacturing and delivering aerospace products, services and solutions to customers on a worldwide scale, pioneering sustainable aerospace for a safe and united world.

With around 130,000 employees and as the largest aeronautics and space company in Europe and a worldwide leader, Airbus is at the forefront of the aviation industry, connecting people and places via air and space.

At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Last but not least, the company has been awarded with the “ Top Employers Spain 2023 ” certification and " Top Employers Europe 2023 " by Top Employers Institute.

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

**Company**:
Airbus Defence and Space SAU

**Employment Type**:
Permanent**Experience Level**:
Professional

**Job Family**:
Manufacturing Engineering

At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

  • Manufacturing Engineer for Composites Process

    hace 3 días

    Getafe, Madrid, España Airbus A tiempo completo

    An opportunity for a Manufacturing Engineer for Composites Process has arisen within Airbus Defence and Space, Getafe (Madrid).RESPONSIBILITIES Drive implementation of 1st installation with required shop floor feedback loops. Create / update routings / BoM / SOI taken into account shop floor needs, Time calculation and Work Preparation Golden Rules in...

  • Ariane 6 Composites Manufacturing Engineer

    hace 2 meses

    Getafe, España Airbus A tiempo completo

    Get integrated in Ariane 6 Multi Functional Team of Operations in Getafe Manuf.& Assy Line, playing a Manufacturing Engineer role thus delivering Production System and providing industrial solutions to program and Production needs - Drive implementation of composites manufacturing processes (AFP/ATL normally) with required shop floor feedback loops. - Create...

  • Ariane 6 Composites Manufacturing Engineer

    hace 3 días

    Getafe, Madrid, España Airbus A tiempo completo

    Get integrated in Ariane 6 Multi Functional Team of Operations in Getafe Manuf.& Assy Line, playing a Manufacturing Engineer role thus delivering Production System and providing industrial solutions to program and Production needs Drive implementation of composites manufacturing processes (AFP/ATL normally) with required shop floor feedback loops. Create /...

  • Structural Design Engineer Composite

    hace 2 semanas

    Getafe, España Airbus A tiempo completo

    A position as Structural Designer has arisen within Airbus Defence & Space. The main activities of a Structural Design Engineer are related with: - Design and Validation of composites/hybrids components and assemblies that are optimized in terms of weight, cost, performance, production/assembly requirements while highest safety of the Product is assured -...

  • Structural Design Engineer Composite

    hace 2 meses

    Getafe, España Airbus A tiempo completo

    A position as Structural Designer has arisen within Airbus Defence & Space. The main activities of a Structural Design Engineer are related with: - Design and Validation of composites/hybrids components and assemblies that are optimized in terms of weight, cost, performance, production/assembly requirements while highest safety of the Product is assured -...

  • Structural Design Engineer Composite

    hace 2 meses

    Getafe, España Airbus A tiempo completo

    A position as Structural Designer has arisen within Airbus Defence & Space. Perform product definition with 3DEXperience, team working with an AGILE methodology, adding value developing the Structural Design solutions and also troubleshooting in production and in service issues. The main activities of a Structural Design Engineer are related with: -...

  • Structural Design Engineer Composite

    hace 2 semanas

    Getafe, España Airbus A tiempo completo

    A position as Structural Designer has arisen within Airbus Defence & Space. The main activities of a Structural Design Engineer are related with: - Design and Validation of composites/hybrids components and assemblies that are optimized in terms of weight, cost, performance, production/assembly requirements while highest safety of the Product is assured -...

  • Structural Design Engineer Composite

    hace 3 días

    Getafe, Madrid, España Airbus A tiempo completo

    A position as Structural Designer has arisen within Airbus Defence & Space.The main activities of a Structural Design Engineer are related with:Design and Validation of composites/hybrids components and assemblies that are optimized in terms of weight, cost, performance, production/assembly requirements while highest safety of the Product is assured...

  • Industrial Measurement Engineer for Tooling

    hace 2 semanas

    Getafe, España Airbus A tiempo completo

    **A vacancy for an Industrial Measurement Engineer has arisen within Airbus Commercial in Getafe.** The successful applicant will join the Tooling & Robotics team, within the plant's manufacturing engineering, to develop and implement the tools, machines and measuring systems for present and future aircraft developments. We are looking for an Industrial...

  • #mmcc 2025 - Master in Composite Materials +

    hace 2 semanas

    Getafe, España Airbus A tiempo completo

    **Ready to join one of our Graduate Programmes in Spain? **AIRBUS and Universidad Politécnica de Madrid (UPM), offer a full time programme that combines a **Master in Composite Materials (MMCC) and an 11 month internship at AIRBUS.** The Master objective is to train graduates from the branches of engineering related to the aeronautical sector, so that they...

  • Cost Engineer for Aerostructure Wing, Moveables

    hace 4 semanas

    Getafe, España Airbus A tiempo completo

    Job Context: The Airbus Cost Engineering Aerostructure for Wing Moveables HTP VTP team is offering a challenging position for a skilled Design and/or Mechanical engineer who is ready to support Aerostructure products of all current and future Airbus aircraft on cost effectiveness, optimized technical solutions, price negotiation and future technologies...

  • Structural Design Engineer Composite

    hace 3 días

    Getafe, Madrid, España Airbus A tiempo completo

    A position as Structural Designer has arisen within Airbus Defence & Space.The main activities of a Structural Design Engineer are related with:Design and Validation of composites/hybrids components and assemblies that are optimized in terms of weight, cost, performance, production/assembly requirements while highest safety of the Product is assured...

  • Industrial Measurement Engineer for Tooling

    hace 4 días

    Getafe, Madrid, España airbus A tiempo completo

    Job Description: A vacancy for an Industrial Measurement Engineer has arisen within Airbus Commercial in Getafe.The successful applicant will join the Tooling & Robotics team, within the plant's manufacturing engineering, to develop and implement the tools, machines and measuring systems for present and future aircraft developments.We are looking for an...

  • Manufacturing Engineering- Maintenance Engineer

    hace 3 días

    Getafe, Madrid, España airbus A tiempo completo

    Industrial Maintenance Engineer at Airbus Getafe Plant - Manufacturing EngineeringAs an Industrial Maintenance Engineer in Airbus Getafe Plant's Manufacturing Engineering team, your main goal is to ensure today's industrial systems while leading the way for tomorrow's innovations. Embodying the values of teamwork, creativity, integrity, and reliability, we...

  • Ait Satellites Manufacturing Engineer

    hace 3 semanas

    Getafe, España Airbus A tiempo completo

    As a **Thermo-Mechanical AIT Manufacturing Engineer **you will be assigned to the Satellites & Payloads Product Line, and given assignment to specific set of projects, managed transversally by a Lead Project Manager. You will get integrated as ME active workforce inside a multi-Functional project team, where all members receive the challenge to successfully...

  • Ait Satellites Manufacturing Engineer

    hace 3 semanas

    Getafe, España Airbus A tiempo completo

    As a **Thermo-Mechanical AIT Manufacturing Engineer **you will be assigned to the Satellites & Payloads Product Line, and given assignment to specific set of projects, managed transversally by a Lead Project Manager. You will get integrated as ME active workforce inside a multi-Functional project team, where all members receive the challenge to successfully...

  • Manufacturing Engineer A400m Retrofit and Mro

    hace 2 meses

    Getafe, España Airbus A tiempo completo

    A position as a **Manufacturing Engineer **has arisen within Airbus Defence & Space in Getafe (Madrid). The successful applicant will join A400M Retrofit and MRO Manufacturing Engineering department. The **Main Tasks **will be: - Develop, implement and support production procedures and processes to fulfill requirements from Engineering, Quality and...

  • Stress Engineer for Uavs and Combat A/c

    hace 2 meses

    Getafe, España Airbus A tiempo completo

    Airbus Defence and Space Metallic and Composite Structure Analysis Engineering. **MAIN ACTIVITIES** - Stress analysis of metallic and composite structures, using Airbus Defence & Space methods, potentially from concept and structural development to certification and in-service maintenance. - Sizing of the structural components, parts and assemblies from...

  • Stress Engineer for Uavs and Combat A/c

    hace 2 meses

    Getafe, España Airbus A tiempo completo

    Airbus Defence and Space Metallic and Composite Structure Analysis Engineering. **MAIN ACTIVITIES** - Stress analysis of metallic and composite structures, using Airbus Defence & Space methods, potentially from concept and structural development to certification and in-service maintenance. - Sizing of the structural components, parts and assemblies from...

  • Buyer for Aerostructure Procurement Composite

    hace 2 semanas

    Getafe, España Airbus Operations SL A tiempo completo

    An opportunity for a Buyer for Aerostructure Procurement Composite Detail Parts (Temp Agency)has arisen within Airbus Operations, Getafe (Madrid). **RESPONSIBILITIES** You want to take part in strategic sourcing projects, you are ready to challenge and influence internal and external stakeholders, you have a curious and open mindset? Join our dynamic and...