Phd-marie-curie: Study On Environmental and

hace 3 semanas

Getafe, España Airbus A tiempo completo

**Context**

One of the open issues in Diagnostic SHM systems for structures is the compensation of Environmental and Operational Conditions (EOC). Those conditions could jam the system measurements and may cause false negatives or positives in the diagnostic target. The capture of the EOC effect on system measurements to compensate them is essential to have a reliable SHM system for Aerospace structures.

**Objectives**

**Expected Results**

a methodology to take into account typical EOC ranges for aircraft structures (a range of -70° to 50 ºC for the temperature and from static to vibrations for the loads). algorithms to compensate the numerically validated EOC. an experiment using composite specimens, panels or subcomponents for validation.

**Requirements**:
Engineering Aerospace / Mechanical Engineer - Physics

Master Degree or equivalent

**Skills/Qualifications**

Aerospace / Mechanical Engineer
Proactive
Good team-worker
- Basic knowledge on:
- Structural health monitoring techniques.
- Structural analysis and testing of composite structures.
- Structural analysis FEM software, NASTRAN and ABAQUS (preferred).
- Programming techniques, MATLAB and PYTHON (preferred).
- Signal processing techniques.
- Artificial Intelligence, neural networks, machine learning, deep learning.

**Additional Information**:
Please refer to the USES2 website **_, _**where you can download the Guide for Applicants for more detailed information.

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

**Company**:
Airbus Defence and Space SAU

**Contract Type**:
Permanent Contract / CDI / Unbefristet / Contrato indefinido

**Experience Level**:
Entry Level / Débutant / Anfänger / Recién titulado

**Job Family**:
Structure & Dynamic Systems Analysis

At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

  • Phd-marie-curie: Study On Environmental and

    hace 1 semana

    Getafe, Madrid, España Airbus A tiempo completo

    ContextOne of the open issues in Diagnostic SHM systems for structures is the compensation of Environmental and Operational Conditions (EOC). Those conditions could jam the system measurements and may cause false negatives or positives in the diagnostic target. The capture of the EOC effect on system measurements to compensate them is essential to have a...

  • Phd Opening On high Temperature Deformation of Al

    hace 4 días

    Getafe, España IMDEA Materials Institute A tiempo completo

    PhD opening on "High temperature deformation of Al alloy 3D printed porous structures" **OTHER DETAILS** **Ref. num.** 2024-TP-R1-159**PhD opening on "High temperature deformation of Al alloy 3D printed porous structures"**: IMDEA Materials Institute is a public research organization founded in 2007 by Madrid’s regional government to carry out research...

  • Phd Candidate Position 1

    hace 3 semanas

    Getafe, España IMDEA Materials Institute A tiempo completo

    HP 3D Printing, AMES and the research groups of Sustainable Powder Metallurgy and Micro **OTHER DETAILS** **Ref. num.** 2023-FS-R1-107IMDEA Materials Institute is a public research organization founded in 2007 by Madrid’s regional government to carry out research of excellence in Material Science and Engineering by attracting talent from all over the...

  • Phd Candidate Position 1

    hace 3 semanas

    Getafe, España FUNDACIÓN IMDEA MATERIALES A tiempo completo

    Función: HP 3D Printing, AMES and the research groups of Sustainable Powder Metallurgy and Micro - Empresa: FUNDACIÓN IMDEA MATERIALES - Nº de Plazas: 1 - Referencia: 2023-FS-R1-107 - Publicada el 27/11/2023 - Publicada hasta el 27/2/2024 - Tipo de Contrato: Sin especificar - Dedicación: Sin especificar - Localidad: GETAFE - Provincia: Madrid -...

  • Phd Candidate Position 2

    hace 3 semanas

    Getafe, España IMDEA Materials Institute A tiempo completo

    HP 3D Printing, AMES and the research groups of Sustainable Powder Metallurgy and Micro **OTHER DETAILS** **Ref. num.** 2023-FS-R1-108IMDEA Materials Institute is a public research organization founded in 2007 by Madrid’s regional government to carry out research of excellence in Material Science and Engineering by attracting talent from all over the...

  • Phd Candidate

    hace 2 meses

    Getafe, España IMDEA materials A tiempo completo

    IMDEA Materials Institute is a public research organization founded in 2007 by Madrid’s regional government to carry out research of excellence in Material Science and Engineering by attracting talent from all over the world to work in an international and multidisciplinary environment. IMDEA Materials has grown rapidly since its foundation and currently...

  • Phd Candidate

    hace 2 semanas

    Getafe, España IMDEA materials A tiempo completo

    IMDEA Materials Institute is a public research organization founded in 2007 by Madrid’s regional government to carry out research of excellence in Material Science and Engineering by attracting talent from all over the world to work in an international and multidisciplinary environment. IMDEA Materials has grown rapidly since its foundation and currently...

  • Postdoc On Liquid Processing of Nanowires

    hace 1 semana

    Getafe, Madrid, España IMDEA Materials Institute A tiempo completo

    A postdoctoral position to study nanowire interaction with liquids and polymers, and to develop methods for processing as macromaterialsOTHER DETAILSRef. num. 2023-JV-R2-92Postdoc on liquid processing of nanowires:IMDEA Materials Institute is a public research organization founded in 2007 by Madrid's regional government to carry out research of excellence in...

  • Phd Candidate Position 2

    hace 3 semanas

    Getafe, España FUNDACIÓN IMDEA MATERIALES A tiempo completo

    Función: HP 3D Printing, AMES and the research groups of Sustainable Powder Metallurgy and Micro - Empresa: FUNDACIÓN IMDEA MATERIALES - Nº de Plazas: 1 - Referencia: 2023-FS-R1-108 - Publicada el 27/11/2023 - Publicada hasta el 27/2/2024 - Tipo de Contrato: Sin especificar - Dedicación: Jornada completa - Localidad: GETAFE - Provincia: Madrid -...

  • Phd Candidate

    hace 1 semana

    Getafe, Madrid, España IMDEA materials A tiempo completo

    IMDEA Materials Institute is a public research organization founded in 2007 by Madrid's regional government to carry out research of excellence in Material Science and Engineering by attracting talent from all over the world to work in an international and multidisciplinary environment. IMDEA Materials has grown rapidly since its foundation and currently...

  • Pre-doctoral Researcher to Work On The Development

    hace 2 semanas

    Getafe, España IMDEA Materials Institute A tiempo completo

    A Research Assistant position to work with the Multiscale Materials Modeling and the Physical Simulation Groups at IMDEA Materials Institute is seek. The researcher will work on developing constitutive models for the mechanical response of different steels fabricated by additive manufacturing. Funding for this position will come from IRIDISCENTE, a...

  • Phd Candidate On Inorganic Nanowire Synthesis for

    hace 2 semanas

    Getafe, España IMDEA materials A tiempo completo

    IMDEA Materials Institute is a public research organization founded in 2007 by Madrid’s regional government to carry out research of excellence in Material Science and Engineering by attracting talent from all over the world to work in an international and multidisciplinary environment. IMDEA Materials has grown rapidly since its foundation and currently...

  • Phd Studentship to Develop a New Class of

    hace 1 semana

    Getafe, Madrid, España FUNDACIÓN IMDEA MATERIALES A tiempo completo

    Función: PhD studentship to develop a new class of metamaterials based on macroscopic fibres of intercalation compounds. The project deals with their synthesis, the study of their lattice structures, and determination of their optoelectronic properties Empresa: FUNDACIÓN IMDEA MATERIALES No de Plazas: 1 Referencia: 2023JV-R186 Publicada el 23/6/2023...

  • Post-doctoral Researcher On Crystal Plasticity

    hace 4 días

    Getafe, España IMDEA Materials Institute A tiempo completo

    Research Associate (PhD in Mechanics, Materials Science) to work in IMDEA in a project focused on the Crystal plasticity modeling of SLM fabricated Ti alloys. **OTHER DETAILS** **Ref. num.** 2024-JS-R2-123**Post-doctoral researcher on Crystal plasticity modeling of SLM fabricated Ti**: IMDEA Materials Institute is a public research organization founded in...

  • Environmental Officer

    hace 2 semanas

    Getafe, España Airbus A tiempo completo

    An opportunity for an Environment officer has arisen within Airbus Defence and Space, Getafe (Madrid). **RESPONSIBILITIES - An Environment Officer will develop, maintain and/or improve the Environmental Management System according to ISO 14001:2015. - They will identify environmental aspects/impacts of technologies, products, services and activities with a...

  • Pre-doctoral Researcher to Work On The Development

    hace 4 días

    Getafe, España IMDEA Materials Institute A tiempo completo

    Pre-doctoral researcher to work on the development of simulation codes for additive manufacturing **OTHER DETAILS** **Ref. num.** 2024-IR-R1-124**Pre-doctoral researcher to work on the development of simulation codes for additive manufacturing**: IMDEA Materials Institute is a public research organization founded in 2007 by Madrid’s regional government...

  • Phd in Computer Systems and Explainable Artificial

    hace 2 meses

    Getafe, España IMDEA Software Institute A tiempo completo

    Applications are invited for a PhD position at the IMDEA Software Institute in Madrid, Spain. The project will explore existing and develop new explainable artificial intelligence methods for understanding and interpreting machine learning-based models that are used in forecasting time-series data. **Who should apply?**: The position requires good...

  • Post-doctoral Researcher On Crystal Plasticity

    hace 1 semana

    Getafe, Madrid, España IMDEA Materials Institute A tiempo completo

    Research Associate (PhD in Mechanics, Materials Science) to work in IMDEA in a project focused on the Crystal plasticity modeling of SLM fabricated Ti alloys.OTHER DETAILSRef. num. 2024-JS-R2-123Post-doctoral researcher on Crystal plasticity modeling of SLM fabricated Ti:IMDEA Materials Institute is a public research organization founded in 2007 by Madrid's...

  • Pre-doctoral Researcher to Work On The Development

    hace 2 meses

    Getafe, España FUNDACIÓN IMDEA MATERIALES A tiempo completo

    Función: Pre-doctoral researcher to work on the development of simulation codes for additive manufacturing - Empresa: FUNDACIÓN IMDEA MATERIALES - Nº de Plazas: 1 - Referencia: 2024-IR-R1-124 - Publicada el 7/2/2024 - Publicada hasta el 31/03/2024 - Tipo de Contrato: Contrato temporal - Dedicación: Jornada completa - Remuneración Bruta...

  • Pre-doctoral Researcher to Work On The Development

    hace 2 días

    Getafe, España FUNDACIÓN IMDEA MATERIALES A tiempo completo

    Función: Pre-doctoral researcher to work on the development of simulation codes for additive manufacturing - Empresa: FUNDACIÓN IMDEA MATERIALES - Nº de Plazas: 1 - Referencia: 2024-IR-R1-124 - Publicada el 7/2/2024 - Publicada hasta el 31/03/2024 - Tipo de Contrato: Contrato temporal - Dedicación: Jornada completa - Remuneración Bruta...